Tying wire is necessary for connecting loose rebar on-site to prevent any movement of the reinforcement during pouring and curing.
Our rebar tie wire is coiled annealed steel wire; the preferred choice for steel fixers.
Each coil is 3.5lbs in weight, which is easily manageable on-site.
| Description | Gauge | Diameter | |
| Rebar Tie Wire | 16 | 0.0625″ ± 0.001″ | 1.588mm ± 0.025mm |
| Rebar Tie Wire | 16.5 | 0.058″ ± 0.001″ | 1.473mm ± 0.025mm |
| Description | Coild ID | Coils OD | ||
| Rebar Tie Wire | 1.87″ ~ 2.07″ | 4.75cm ~ 5.26cm | 4.43″ ~ 4.63″ | 11.25cm ~ 11.76cm |
| Description | Tensile Strength | |
| Rebar Tie Wire | 300 ~ 380 Mpa | 43500 ~ 55100 PSI |
| Weight / Coil (lbs) | 3.5 |
| Weight / Box (lbs) | 70 |
| Coils / Box | 20 |
| Boxes / Pallet | 48 |